Assessment Validation Explained: Methods to Validate Assessments
Assessment Validation Explained: Methods to Validate Assessments
Blog Article
RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation must be conducted.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
The Fundamentals of Assessment Validation
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.
For this piece, our emphasis will be on assessment tool validation.
The Process of Assessment Tool Validation
Having distinguished between the two types of validation, let’s dive into the details of assessment tool validation.
Best Times to Conduct Assessment Tool Validation
The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.
However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:
- resources are updated by you
- new training products are added by you on scope
- your course includes training product updates
- identify your learning resources as a risk during your risk assessment
ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.
Training Products to Validate
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
Starting Assessment Tool Validation: What You Need
Educational Materials
Given that you are validating your assessment tools, you will need the complete array of your learning resources:
Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.
Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Panel for Validation
Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.
As a whole, your validation panel must have:
Vocational competencies and industry skills pertinent to the unit being validated
Current knowledge and expertise in vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it provides documentation that you have validated your resources before students use them.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates can be found online. These tools often have validators review the tools as a whole to verify if they meet the principles of assessment.
Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Check?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Rules
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required website skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Are the assessment tools updated to reflect current units of competency and industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Act on Your Words
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
changing diapers
prepare bottles, feed infants from bottles, and clean equipment
prepare solid food and feed babies
appropriately respond to baby signs and cues
prepare babies for sleep and settle them
monitor and promote age-appropriate physical exploration and gross motor skills
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Full Compliance or Not Competent
Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
The answer may include:
Needed materials
Appropriate costs
Activity timeframe
Allocated duties and responsibilities
When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Answers could include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.